The 2023-on Ford Ranger Raptor 3.0 V6 EcoBoost already combines a twin-turbo petrol engine, serious off-road ability and unmistakable road presence. The right upgrades can help you make it your own, whether you want a stronger stance, a more involving soundtrack or hardware to support a future performance build.
At RTECSHOP, we can supply Ranger Raptor suspension, exhaust and engine upgrades, as well as alloy wheels and off-road or all-terrain tyres. Our St Albans team can also advise on fitment and provide a fitting quote.
A lift kit is one of the most effective visual changes for a Raptor. The H&R lift springs (28562-1) and Eibach Pro-Lift-Kit (E30-35-062-03-22) are each listed with approximately 40mm of front lift and 30mm at the rear. The Eibach kit is designed to work with the standard dampers.

Raising the body can help with clearance over uneven ground and create room for a more purposeful wheel and tyre package. Actual lift depends on specification, accessories and load; lifting the suspension alone does not raise the lowest parts of the axles by the same amount. Check the details of each kit and ask us about fitment before ordering.
A performance exhaust is a natural way to give the V6 Raptor a more distinctive sound. Our Ranger Raptor range includes a Milltek valved cat-back system, with a choice of tailpipe finishes including polished, black, titanium and carbon options. A compatible Milltek active valve controller is available separately; check the individual listing for compatibility and options.
When choosing a system, think about the sound you want on a long journey as well as the look of the tailpipes. Our team can discuss the available options and fitting.
An upgraded intake can change the appearance and sound of the engine bay while replacing parts of the original induction system. The range includes the K&N 50-2628 NextGen cold air intake and the Pipercross PK452 kit. The Pipercross system uses twin foam filters, an aluminium heatshield and intake tubes.
Performance results vary with the vehicle, conditions and supporting modifications, so compare the specifications and fitment information on each listing when choosing.
The Pro Alloy RAPPRO1 intercooler offers increased cooling area and internal capacity compared with the original unit. The listed core measures 470 × 266 × 125mm, with a stated 7.5-litre internal capacity versus 4 litres for the original intercooler. The kit includes mounting hardware and is designed to fit without permanent changes to the vehicle.
We also list a K&N charge pipe upgrade. Charge pipe and intercooler upgrades can be considered as part of a broader build; check the product details and suitability for your exact Ranger Raptor before ordering.
For those who enjoy hearing the turbo, the Turbosmart Kompact EM range offers two distinct approaches. The Dual Port valve (TS-0223-1082) vents some air to atmosphere for an audible release, while the Plumb Back valve (TS-0223-1282) recirculates the air. Both are listed as direct replacement electronic valves for the 3.0 V6 application.
Wheels and tyres transform the Raptor's stance and can be chosen around the way you use the truck. We can supply alloy wheels and off-road or all-terrain tyres, whether you want a road-focused look, a mixed-use setup or a more aggressive appearance.
There is more to a successful package than diameter alone. Wheel width, offset, load rating, tyre size and clearance all matter, particularly when combining a lift, wider arches or larger tyres. Tyre choice also affects road noise, ride, wet-weather behaviour and speedometer readings. Speak to our team with your vehicle details and intended use so we can discuss a suitable package.
We are also developing our Ranger Raptor styling range, with options planned for items such as wide arches, front bars, roof lights and bonnet upgrades. Contact us for current availability and advice on combining exterior parts with your preferred wheel and tyre setup.

Start with how you use the vehicle. For a taller stance, compare the H&R and Eibach spring kits. For sound, consider the Milltek exhaust or a Turbosmart Dual Port valve. For a performance-focused build, look at the intake, charge pipe and intercooler together. If appearance and off-road use are your priorities, plan the wheels, tyres and any arch changes as one package.
The H&R and Eibach kits listed here specify approximately 40mm front and 30mm rear. Results depend on the individual vehicle and its equipment.
Yes. We can help with suitable alloy wheels and off-road or all-terrain tyres. Contact us with your vehicle and your preferred size or style to discuss the options.
Yes. Contact our St Albans team to discuss the parts, availability and a fitting quote.
Ready to upgrade your Ranger Raptor? Contact RTECSHOP for advice on parts, wheels, tyres and fitting.